Muratec MFX-1300/1700 manual What you see on the LCD Document Full

Just in case

What you see on the LCD Document Full

Document Jam ContStor Enter/Cancl

Document Stored

Enter No. (0-32)

Enter Reduce/Enlarge

Enter Scan Size

Feeder In Use

What it means/What to do

You tried to enter an document into an F-Code box, but the machine has reached its capacity (30 documents). Delete documents stored in F-Code boxes until the machine will let you pro- ceed.

An original document jam while you are using the ADF for either faxing or copying. See page 5.1 for instructions on clearing the jam.

You tried to erase a batch box which contains at least one document. Erase the document(s), then try again.

You tried to enter a call group number greater than

32.Your machine can maintain 32 call groups, numbered 1-32 (call group 0 covers all the groups). Determine the correct call group identifier number and enter it, instead.

You tried to copy your document on the paper other than Letter, Legal or Half letter sized paper using the bypass tray, or the calculated reduction or enlargement ratio is out of the acceptable range (50 200 %) when the copy reduction or enlarge- ment ratio is set to Auto .

Enter the reduction or enlargement ratio manually although a part of the image might be lacked, or change the paper for copying.

When you using the FBS (Flatbed scanner) glass, you must manually enter the scan size of your document. Press D O C U M E N T SIZE to choose the size.

The command you re trying to enter requires the use of the ADF, which is already in use. W aitforthe machine to stop using the ADF, then try again.

What you see on the LCD Hang Up Phone

In Relay Box

In Secure Box

In Use in P OneTouch

Invalid I.D. Code

Invalid Number

Invalid Paper Size

Invalid Passcode

Line Busy

What it means/What to do

The optional handset is off-hook.

Hang it up, making sure the upper part of the handset presses down on the hook button.

You tried to store a document for polling in an F- Code box which is set to be a relay box.

Select an F-Code box which is set to be a bulletin box, then try again.

You tried to store a document for polling in an F- Code box which is set to be a security box. Select an F-Code box which is set to be a bulletin box, then try again.

You tried to erase the F-Code box or Batch box, which is programmed in the programmable one- touch key.

Erase the programmable one-touch key that con- tains the F-Code box or Batch box you want to erase, then try again.

The F-Code box I.D.code you entered isn t valid. Try re-entering your F-Code box I.D.code.

You pressed a key which has no function during the current operation.

If the optional printer controller is attached to your machine, it can use the special sized paper with the bypass tray. However, it should be used only for the PC printing, it cannot be used for copying. So, if you tried to copy onto the special sized paper with bypass tray, this message will appear.

The protection passcode you entered isn t valid. Repeat the operation, entering the correct protec- tion passcode.

You tried to erase a document which someone is polling from your machine. W ait for the fax to com- plete the polling operation, then try again.

5.6