Muratec MFX-1300/1700 03F-Code Document Enter I.D. Code2345, 03Erase F-Code Box Enter I.D. Code

Advanced features

3 Press ENTER.The LCD shows:

03:F-Code Document

Enter I.D. Code:****

Note: If the F-Code security box is not storing any documents, the machine briefly displays the following before returning to step 2:

03:Select F-Code Box No Document Stored

4 Use the numeric keypad to enter your F-Code box sfour-digit I.D.code. Here we ve entered 2345:

03:F-Code Document

Enter I.D. Code:2345

5 Press ENTER.

If you ve entered the correct I.D.code, your fax machine prints all documents in the F-Code security box and then erases them.

If you ve entered an incorrect I.D.code, your fax machine aborts the operation and returns to standby mode.

Using a relay box

Once your fax machine receives a document via ITU-Tsub-addressing to one of its F- Code relay boxes, it sends it to the other fax machines that you ve set up on your relay box. (See Creating or Modifying an F-Code box , pages 3.25 3.29.)

If you set the Auto print mode to on when you created the relay box, your machine will print the received document, then relay it to the other machine. Otherwise, your machine will only relay it to the other machines, not print it. See If you chose Relay, pages 3.28 3.29 for more details on this setting.

Also, you can send (relay broadcast initiation) the document to another hub machine s F-Code box and get that machine to relay it to others. See F-Code transmission on pages 3.33 3.34 for more detail.

The hub performs a relay broadcast, and the machine which sends the original docu- ment to the hub has performed a relay broadcast initiation.

Erasing an empty F-Code box

An F-Code box must be empty in order to erase it. (If you select an F-Code box in these steps which is not empty, the machine beeps. If this happens, print all documentsinthat box before erasing it.)

To erase an empty F-Code box:

1	Press Program key,C,4,0,2, ENTER.The LCD shows:
		Select F-Code Box	or	Select F-Code Box
		01:No Number Stored		01:Murata Machinery
2
	Use the numeric keypad to enter the two-digit identifier number (01-50) of the F-
	Code box you want to erase. Here, we ve entered 0,3 and see:
		Select F-Code Box
		03:Muratec America
3
	If you want to erase a different F-Code box than the one that appears on the LCD,
	enter the box number now.
4	Press ENTER. If the F-Code box is empty,the LCD shows:
		03:Erase F-Code Box
		Enter I.D. Code:****

Important: If you select an F-Code box which is not empty, the machine beeps and, before returning to step 3, briefly displays:

Select F-Code Box

Box In Use

Print any documents received in the F-Code box, then repeat this procedure from the beginning to erase the box.

Otherwise, select another F-Code box.

5 Use the numeric keypad to enter the four-digit I.D.code. Here, we ve entered 2345:

03:Erase F-Code Box Enter I.D. Code:2345

3.32