Muratec MFX-1300/1700 manual Reserved ** Jun 29 2002, Select Program No P1Delayed

Advanced features

Fax dialing with programmable one-touch

To dial a fax call using a programmable one-touch number:

1 Set your document in the ADF or on the FBS glass.

2 Make any necessary adjustments as usual.

3 If you are using the FBS glass, set the document size by pressing D O C U M E N T SIZE before you press the programmable one-touch key.

4 Press the programmable one-touch key in which you ve stored the fax communi- cation command.

Your fax will perform the operation now, or at whatever time you programmed.

Note: To review the details of each operation, review the instructions for that opera- tion. See page 3.35 for a list of each operation and where to find it.

If you programmed this key to delay its operation, the LCD shows:

** Reserved ** Jun 29 2002 17:17

If you programmed this key to perform the operation immediately after you press it, the LCD shows the number:

9-1-972-555-4335

A4 Normal

Printing a list of your programmable one-touch keys

You fax machine can print a list of the commands you ve stored in your programmable one-touch keys.

The list includes:

(1)each key s one-touch number

(2)the fax/telephone number

(3)when the command should start

(4)which command you ve selected

(5)if applicable, the selected call group(s) or F-Code box(es) you ve stored in the key

(6)the individual settings for each key

To print a list of programmable one-touch keys, press Program key,E,1,0,8, ENTER.

Erasing a programmable one-touch key

1 Press Program key,A,3,0,2, ENTER.The LCD shows the first programmable one- touch number that has been programmed:

Select Program No.

P1:Delayed

Note: IfP2 appears, it means P1 is empty.

2 PressP2: the programmable one-touch key you want to erase. Here, we ve selected

Select Program No.

P2:Polling

3 To erase a different programmable one-touch key than the one that appears on the LCD, press that key now.

4 Press ENTER.The LCD shows:

P2:Erase P One-Touch

Check Enter/Cancel

Important: If you want to quit without erasing the programmable one-touch key you ve selected, press CANCEL.The fax will return to step 2.

5 Press ENTER to erase the number.

Erase P One-Touch ** Complete **

To erase another programmable one-touch key, repeat steps 2 5. Or press STO P to return to standby mode.

3.48