Muratec MFX-1300/1700 manual Programming printouts, Type List Print

If you want to select a different programmable one-touch key than the one that appears on the LCD, press that key now.

13	Press ENTER.The LCD asks if you want to turn the Fax & Copy feature on or offfor
	this programmable one-touch number.
		Fax & Copy	:---
		/	/Enter
14
	Press until the mode you want appears.
15	Press ENTER.
16	Press STO P to return your machine to standby mode.

Advanced features

Programming printouts

To program a programmable one-touch key to print a list:

1 Press Program key,A,3,0,1, ENTER.The LCD shows the first empty programma- ble one-touch number available:

Select Program No.

P2:No Number Stored

Note: IfP2 appears on the LCD, it means that you have already entered a num- ber for P1.You can see what you programmed into P1 by pressing ,if you want. For example, if you set P1 for printing a list of the machine set- tings, you will see:

Select Program No.

P1:Machine Settings

Press to go back to the programmable one-touch key you want to enter.

Note: To erase a programmable one-touch key, see page 3.48.

2 Press the key that you want to program or change. Here, we ve selected P2.

Select Program No.

P2:No Number Stored

Note: If your previous command for this key was for printing a list and you want to keep this key programmed for printing a list, use these instructions to make changes. But if you want to assign this key to a completely different operation (for a delayed transmission, for example), then you first must erase the stored command before programming the new one.

3

4 Press ENTER.The LCD asks which operation you want to program into the pro- grammable one-touch:

Type :Communication / /Enter

Note: If changing a previously stored command, skip to step 7.

5 Press until ListPrint		appears.
	Type :List Print
	/	/Enter

3.45