Muratec MFX-1300/1700 If you have unsatisfactory printout quality, Cleaning the LED print head

Open the platen cover.

Turn off your fax machine.

5 Open the inner cover fully.

Important: You must hold the cover open. It won t stay open by itself.

6 Use the cloth with the rollers cleaner to clean the face of the rollers. Rotate the rollers by hand to allow cleaning of the entire roller surface.

Cleaning the FBS glass, Contact glass and white pad

1

2 Get a soft, lint-free cloth and moisten it with isopropyl alcohol.

Important: Make sure the cloth doesn t have any rough areas. Otherwise, it could scratch the glass surface of the FBS.

3 Using the cloth, gently clean the FBS glass, contact glass and the white back- ground area on the underside of the platen cover.

Just in case

If you have unsatisfactory printout quality

Your machine automatically cleans its charger and transport roller, two items which are very important to printout quality. So, if you notice poor printout quality (whether on received faxes or on copies), it may mean that your machine requires service. Review Print quality problems (pages 5.3-5.4), and see whether any of the proposed solutions helps your machine. If none do, please call your authorized Muratec dealer or call the Muratec Customer Support Center at (800) 347-3296 (from the U.S. only).

Cleaning the LED print head

If you find your fax recipients complaining that the faxes you receive or copy image quality are streaked, the LED print head may be dirty.

Important: Be careful not to put your hand between the top cover and the machine.

1

2 Get a soft, lint-free cloth and moisten it with isopropyl alcohol.

3 Open the top cover and then open the printer cover.

Important: The fuser unit becomes very hot. Do not touch the

fuser unit when you are cleaning the LED print head.

4 Using the cloth, gently clean the LED print head.

Note: Do not use abrasive materials on the LED print head, and do not subject the LED print head to strongly shock.

5.13