Muratec MFX-1300/1700 User Settings Fax Settings Scan Parameters, Off Security Rx, 01.TCP/IP*3

						Getting started
Level one function	Level two function	Level three function	Summary of setting	Default setting	Page
B. User Settings	2.Fax Settings	01.Scan Parameters	You can set the following settings for send fax message.
			Primary resolution mode	Normal	4.1
			Primary contrast mode	Normal
		02.Print Parameter	You can set the following settings for receive fax message.
			Reduction rate	Auto	4.3
			Reduction margin	40 mm
			Half-page reception	Off
		03.# of Rings	Number of rings before your machine answers.	Two times	4.4
		04.Redial	Number of times and interval for automatic fax redialing.	Two times	4.5
				One minute
		05.Dialing Pause	Dialing pause length.	Two times	4.5
		06.Memory Tx	On/Off setting for Memory transmission.	On	4.2
		07.Quick Memory Tx	On/Off setting for Quick Memory transmission.	On	4.2
		08.TTI Tx	On/Off setting for sending your TTI.	On	4.2
		09.ECM Mode	On/Off setting for ECM mode.	On	4.1
		10.Block Junk Fax	Reject the fax reception from unauthorized incoming faxes.	Off	3.53
		11.Security Rx	Keep all received fax messages in memory and after print them.	Off	3.49
		12.PIN Mode	Prevent unauthorized long-distance calls.	Off	3.51
		13.Passcode	Enter passcode for limiting polling access.		3.15
		14.Rotate Rx	On/Off setting for Rotate reception.	Off	4.4
		(for MFX-1700 only)
		14.DRD (for MFX-1300)	Set the ring pattern to use with phone company s Distinctive Ring	Off	3.23
		15.DRD (for MFX-1700)	service.
	3.Copy Settings	01.Scan Parameters	You can set the following settings for copying.
			Primary document type	Text	4.6
			Primary contrast mode	Normal
		02. Print parameter	You can set the margin for copying.	24 mm	4.6
		03.Auto Reset Time	Set the time (minutes) of resetting the copy parameters.	3 minutes	4.7
		04.Copy Auto	Set the default setting to Auto for one of the following:	Paper size	4.7
			Paper size Reduce/Enlarge ratio Document size
		05.Copy Protect	On/Off setting for Copy protection.	Off	2.18
		06.Sort Copy	On/Off setting for Sorting copy.	On	4.7
		07.Nega/Posi	On/Off setting to reverse copy of black and white areas.	Off	2.17, 4.7
		08.Combine	On/Off setting to combine.	Off	2.17, 4.8
		(for MFX-1700 only)
	4.Printer Settings	01.TCP/IP*3	Enter the IP Address, Subnet mask and Gate way address.

*3: This option appears only if the optional NIC (network interface card) has been installed.

1.15