Muratec MFX-1300/1700 manual Scan settings, Setting E C M, ECM Mode Enter, ECM Mode Off Enter

Settings for transmission

Scan settings

Default setting: Primary resolution: Normal, Primary contrast: Normal

Two different settings tell your machine how to scan documents. The initial factory set- tings are probably right for most applications, so try using them before changing any of these settings:

Primary resolution mode	Sets the resolution for your documents. Choose either
normal, fine, superfine ( S Fine on the LCD) or grayscale mode ( Gray ).
Primary contrast mode	Sets how light or dark you want faxed documents to be

when they arrive at their destinations.

Note: The primary settings you choose effect your fax activity only.

To set these modes:

1 Press Program key,B,2,0,1, ENTER.The LCD asks you to select a resolution:

Resolution	:Normal
/	/Enter

2 Press or until the mode you want appears. In this example, we ve chosen fine resolution.

Resolution	:Fine
/	/Enter

3 Press ENTER to save the setting. The LCD asks you to select a contrast setting:

Contrast	:Normal
	/ /Enter

4 Press or until the mode you want appears. In this example, we ve chosen light contrast.

Contrast :Light / /Enter

5 Press ENTER to save the setting.

Changing the default settings

By following the steps above, you ve set your defaults for scanning. Before sending doc- uments, you can override these default scan settings for that transmission.

To override the default resolution and contrast settings before sending a document:

Press RESOLUTION to change the resolution.

Press CONTRAST to change the contrast.

Once your document is transmitted, your machine returns to its default settings.

Setting E C M

Default setting: On

Line noise, orstatic on the line during a call, can easily disrupt the flow of data from one fax machine to another.

That s why your fax machine gives you the option of using Error Correction Mode (E C M). When two fax machines communicate while running in E C M, the sending machine auto- matically checks the data as it sends. If the receiving fax machine can t verify the transmission, the first machine will re-send it as necessary.

Note: E C M gives you a better chance of transmitting a fax document over a bad phone line, but it could also slow down the transmission time. And the worse the line is, the slower the transmission. That s why the machine lets you turn E C M on or off as needed.

Note:		Not all fax machines have E C M.If you ve activated E C M and then transmit to a
		fax machine not currently using E C M, there will be no change in the fax transmis-
		sion from a usual, non-E C M transmission.
1	Press Program key,B,2,0,9, ENTER.The LCD shows the current E C M setting:
		ECM Mode	:On
		/	/Enter
2
	Press or until the mode you want appears.
	In this example, we ve chosen Off.
		ECM Mode	:Off
		/	/Enter
3
	Press ENTER to save the setting.

4.1