Muratec MFX-1300/1700 manual Memory overflow message, Ifthepaper runs out while copying, Ltr 100%

Memory overflow message

If you ve stored too much information in your machine s memory, a Memory Overflow message may appear on the LCD:

Memory Overflow

Start Or Cancel

This appears because (1) too many pages have been stored in the memory,or (2) the pages that are stored have too much information on them for your fax machine to remember.

If this message appears, press STA R T to tell your machine to copy as many pages in memory, or press CANCEL to delete from memory all pages stored during the current operation (but not previous operations).

Note: If you don t operate your machine within 60 seconds, the machine will automati- cally print the document stored in the memory during the current operation.

Ifthepaper runs out while copying

When your machine runs out of paper, it beeps, the red light

of the printer status lights glows and the LCD shows which source has run out of paper the 1st cassette, 2nd cassette (optional) or the bypass tray.

In this example, the machine runs out of the paper in the 1st cas- sette:

1st Cassette Please Supply Paper

If you want to cancel the current copying job, press STO P. Otherwise, supply the paper to displayed paper source to resume the copying.

Basic operation

Making copy settings

When the machine is in the Copy mode, the LCD shows:

￿￿￿￿￿￿￿ ￿￿￿￿ Number of copies

Copy reduction or enlargement ratio

Recording paper size

Document size

Number of pages

Use the numeric keypad to enter the desired number of copies for the document.

Copy reduction or enlargement rate

Your fax machine can make enlarged and reduced copies. For more information, see Enlarged or reduced copies, pages 2.13 2.14.

Document size

To select the document size manually, press D O C U M E N T SIZE repeatedly until your desired document size appears. You can choose the Letter, Legal or Half letter:

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

Note: When the document size is set to Auto (see Setting copy auto, page 4.7) you may see the LCD as below:

Copy Ready		1
[ Ltr ]	Ltr	100%

[ ] means the machine automatically select the document size.

Note: According to the magnification ratio or recording paper size, the document size will be not displayed:

Copy Ready		1
-----	Ltr	50%

2.15