Muratec MFX-1300/1700 manual Using your fax machine as a phone, Dialing a telephone number, Redial

Basic operation

Using your fax machine as a phone

Your fax machine can also be used as a phone, if you have an optional handset installed. The following is a brief look at the machine s telephone features.

Dialing a telephone number

1 Pick up the optional handset. You will hear a dial tone.

2 Dial the number by the using numeric keypad. or

Press the one-touch key. (See One-touch phone dialing, on page 3.4.)

or

Press SPEED DIAL/TEL INDEX once, then press the three digit speed-dial number. (See Phoning via speed-dial, on page 3.6.)

or

Press SPEED DIAL/TEL INDEX twice, then search the name you want to call using the cursor key. (See Easy dial directory dialing, page 3.8.)

3 When the other person answers, begin speaking.

On-hook dialing

Because your machine has a monitor speaker, you can dial without picking up the optional handset.

Note: If you want to use MONITO R/CALL key, you should assign it to a Soft key in advance. (See page 3.16.)

For hands-free dialing:

1 Press MONITO R/CALL.You ll hear a dial tone (unless you have set your speaker volume to Off; see page 1.8), and the LCD shows:

** Tel Mode **

_

2 Dial the number you want. Use either the numeric keypad, a one-touch key,a speed-dial number or telephone index to dial.

Important: Your machine s monitor speaker is not a speaker phone. If a person answers the call, pick up the handset to speak.

Note: Ifthecallfails,press MONITO R/CALL to hang up.

Redial

Note: To use REDIAL/PAUSE key, you should assign it to a Soft key in advance. (See page 3.16.)

1 Lift the optional handset to get a dial tone.

2 Press REDIAL/PAUSE.The LCD will show:

View Redial History 0:1234567890

3 Your machine can remember the latest 10 dial numbers. Press or untilthe dial number you want to redial appears.

4 Press START.
When the other person answers, use the optional handset to speak to that per-
son.
Changing the dialing type
If, with your machine set for pulse	dialing, you must enter tones ( DTMF ) during a call,
press DIALING OPTIONS once (the !	symbol will be shown on the LCD).Your machine

now will tone dial all subsequent numbers.

Note: To use DIALING OPTIONS key, you should assign it to a Soft key in advance. (See page 3.16.)

Note: Using this key enables tone transmission from the numeric keypad afterthecall is connected. When you hang up the call, your machine will return to pulse dialing for the next call.

2.19