Clearing paper jams | Muratec MFX-1300/1700 guide

Clearing paper jams

If an original document jams

1	If an original document jams in the ADF while scanning the document into the
	memory for faxing or copying, the LCD will show:
		Document Jam
		ContStor Enter/Cancl

	If you do wish to continue the operation, press ENTER and proceed to step 2.
	To abort the operation, press CANCEL.This will erase from memory all pages
	stored during this operation, and the machine will return to standby mode.
	Important: If you wait more than 60 seconds without pressing any key,the
			machine will erase from memory all pages stored during this oper-
			ation and the machine will return to the standby mode.
	Note: If the document jammed in the following case, the following message will
		appear and the machine will abort the operation anyway; instead, you ll
		have to perform the job again from scratch.
			The first page of the document jammed
			During the real time transmission or quick memory transmission
			During non-sorting ADF job

			Open&Close ScanCover
			Reset Document

		Also, the Repeat transmission. Error on scan at page xx message will
		be printed out if the document jammed during transmission.
2	The LCD will show which page (i. e., which page number) is jammed. To continue
	scanning from the jammed page forward (keeping in mind the Note at the end of
	step 1, above), press START after clearing the jam.

		p 2. Reset Document
		Press Start Key

	Note: If you wait more than 60 seconds without pressing any key, the machine
		will begin to send or copy the document(s) it has.
	If you wish to cancel this operation, press STO P.The machine will delete all pages
	from memory and then return to itsstandby mode.

Just in case

To remove the document:

1 Open the scanner cover.

2 Lift the original document from the machine.

Note: If you cannot remove the original document, open the inner cover as shown at right, then remove the document.

3 Gently close the scanner cover, making sure both sides are snapped down securely.

Note: If the original document has become wrinkled or torn, do not re-send it.

5.1

Image 124

Muratec MFX-1300/1700 manual Clearing paper jams, If an original document jams, Document Jam ContStor Enter/Cancl

Contents

MFX-1300/1700 Welcome Trademarks CopyrightEnergy saving Copyright 2002 by Muratec America, Inc, Allrights reserved Before using your Muratec fax machine Where to set up your fax machineAvoid extreme high / low temperature Follow these guidelines when setting up your fax machine Power requirements General PrecautionsDo not share an extension cord connector with other plugs It can cause electrical shock Causing serious injury Storing and handling toner and drum cartridgesDirect sunlight Dusty conditions Don t stack boxes or furniture around the outlet This page intentionally blank Elcome to your Muratec fax machine Find your serial number and write it down Table of Contents Just in case Changing the default settingsAppendix and index Getting started Packaging contents Where you plug in the a C power cord Where you plug in the optional handsetWhen you use the optional RS-232C interface kit MFX-1300/1700 or as an upgrade afterward Glows when the machine is in the Copy mode Glows when the machine is in the Fax modeControl Panel Overview Document into its electronic memory Setting up the machine O M Press to turn on or offthe Z O O M lightKey Or key Setting up Pick an installation spotPower tips Unlocking the mirror carriage AI.2 Toinstall these supplies Installing the printing suppliesUnpack the drum cartridge from its carton Plug in and power up Attach the paper-handling partsWarming Up Copy Ready Ltr Auto 100% Adjust the monitor speaker s volume Turning off the transport modeLoading paper Setting of the Paper Size Click when it s properly in placeAdjust the paper guides to fit the size of paper Attach the paper size sticker on the cassette sfront Bypass Tray Ltr Enter Loading paper in bypass trayAppears. In this example, we ve chosen Ltr Then push back the flapper release lever Turning off the power How to operate the machineOperating tips Changing modes Entering characters Your Name UpperYour Name Lower Your Name Code Searching the functions using the cursor key Press Enter to entry the function settingPress the Program key Until your desired item appears Function table User Settings Fax Settings Scan Parameters You can set the margin for copying 24 mm Auto Reset TimeOff Combine On/Off setting to combine Off Security Rx On/Off setting for Department code activation Off Journal Line UpEnter your message for the cover Department Code Store Document NIC Status*5 Print the NIC network interface card settings Print a list of the blocked numbers Cover Print a coverDepartment code Code Box List Print a list of F-Code boxes Batch Box List Print a list of Batch boxes Batch Doc. List Clearing stored settings Entering initial settingsGetting started Language English Enter Sleep Mode Timing 001-240 005 min Daylight Saving On EnterYour Fax Number Your Fax Number 9725555525 Basic Operations How to set the document Sending faxesGuidelines Acceptable document sizes Resolution, grayscale Mixing resolution and contrast in a multipleReviewing resolution and grayscale Dialing pause Memory Overflow Start Or Cancel Memory transmissionMemory overflow message Quick memory transmission Sending a fax using the ADF == Command01 ==Document Ready Mem100% Press Start Sending a fax using the FBS glass == Command01 ==Press Start 919725552009 919725552009 Ltr NextDoc Mem100% Redialing Tel ModeView Redial History Reviewing or canceling commands C015552009 CancelNo Command To redial a voice call manually using the optional handset Printing a delayed command list C01Broadcast Cancel5550388 Cancel Printing a stored document Communication Result Comm.Cancel/Enter View the result of fax transactionTx001ABC OK 10/12 Printing all result of daily fax transactions Answering calls manually Receiving faxesReception modes How to select the fax reception mode Ifthepaper runs out while fax receptionFax Ready Enter Fax/Tel Ready Enter Your machine s copier features Basic copy procedureMaking copies Single copy Sorting multiple copies using ADF Press Sort to turn the sort setting offStacking multiple copies Enlarged or reduced copies Using the bypass tray Copy Ready Ltr Ltr 100%Go in, not film with any backing or strip Set the paper in the bypass tray Making copy settings Memory overflow messageIfthepaper runs out while copying Ltr 100% Installed, the bypass tray and Auto select mode Text Select this mode when copying lettersIngs Taining photographs or drawings with letters Special copy function Nega/Posi Off EnterNega/Posi Enter Copy Nega/Posi Ltr Auto 100% Copy protection Using your fax machine as a phone Dialing a telephone numberOn-hook dialing Redial Dialing in the event of a power failure Call requestAttaching an optional handset Attaching a second phone Basic operation This page intentionally blank Delayed transmission Batch transmission Special features Security featuresBroadcasting Polling Autodialer Autodialer basics 02Group No Using one-touch keys02Group No 16,27 02Erase One-Touch Check Enter/Cancel Select One-TouchErase One-Touch Complete Plano Office A4 Normal Using speed-dial numbers Enter Speed-Dial No 001No Number StoredEnter Speed-Dial No 0059-555-397-0123 005Erase Speed-Dial Check Enter/Cancel 005Name Upper Lower West Coast Sales005Group No 005Group No ,17,30 Plano Office S018 Fax dialing via speed-dialPhoning via speed-dial Call group dialing Send a fax via call groupEnter Group No Printing a call group directory EasyDial directory dialing ABC CompanyIf an EasyDial call fails If it was a fax call Delayed Enter Time 30/2215 BroadcastingMaking changes to broadcasts Press Start 03,S098,G12,9-555 Delayed transmission Setting up a delayed transmission Batch transmission Creating or modifying a batch box Printing a list of batch boxes Storing a document for batch transmissionPrinting a list of stored batch documents Printing a document stored in a batch box Erasing an empty batch box Erasing a document stored in a batch boxSelect Batch Box Document Stored Delayed Enter Time 15/1705 PollingRegular polling Being polled Limiting polling access to your fax machine Passcode Special features Soft KeysSelect Soft Key No Energy Saving 3Combine Enter Overwrite? Check Enter/Cancel Macro keysSelect Macro Key M1No Number Stored Select Macro Key M2No Number Stored Upper Name Upper Delayed Include Start/Enter? Check Enter/CancelReserved ** Jun 01 2002 Erase Macro Check Enter/Cancel Select Macro Key M1Activity journalSelect Macro Key Erase Macro Complete Setting the activity journal Fax & Copy Setting the printing order of the activity journal Setting the reportsTCRsPrinting an activity journal manually Cover Off Enter CoverCover Enter OneLine + distinctive ring detection Ring Pattern Faxing/receiving first, then talking Talking first, then sending a faxTalking first, then receiving a fax Responding to a call request Power of QuadAccessﬁ Code BoxesOK Will Scan Soon Code an introduction Select F-Code Box 01No Number Stored 01NY Branch Office Select F-Code Box 03No Number Stored 03Muratec America 03Password 123456789*# 03Password 135*7#9Box Type Bulletin Rx Protect Off Enter Erase Tx Doc Off Enter Code Doc Hold Time Hold Time 00-31Enter Relay Number Enter Relay Number S001,G12 Using a bulletin box Printing a list of F-Code boxesSelect F-Code Box 01No Number Stored 01Murata Machinery Select F-Code Box 03Muratec America 03F-Code Document Enter I.D. Code 03F-Code Document Enter I.D. Code234503F-Code Document File No 03Select F-Code Box No Document Stored Using a security box 01Murata MachinerySelect F-Code Box No Document Stored 03F-Code Document Check Enter/Stop No Document Stored 03F-Code Document Enter I.D. Code2345 03Erase F-Code Box Enter I.D. CodeSelect F-Code Box Box In Use 03Erase F-Code Box Enter I.D. Code2345 03Erase F-Code Box Check Enter/Cancel Enter PasswordErase F-Code Box ** Complete Enter Sub-Address FA X to switch the machine to Fax mode To delay it, go on to stepCode polling Press Using the power of programmable one-touch keys Programming a delayed transmissionProgrammable one-touch keys Select Program No P2No Number Stored P1Polling Document Contrast Enter Resolution EnterMemory Tx Enter Report Enter Cover EnterFax & Copy Enter Programming a broadcast / group Delayed Enter Time 30/1705 Type Communication EnterP2Fax#/Advan.Func 5558743 P2Fax#/Advan.Func G5,G7,01,S006,9-55 Fax & Copy CoverProgramming regular polling Advanced features Press ENTER.The LCD now shows either Programming an F-Code transmissionImportant Do not press Enter For this operation to work, two things must be true If you want to delay the transmission, press Contrast Memory TxReport Programming F-Code polling ENTER,ENTER Programming a batch transmission Resolution EnterContrast Enter Programming printouts Select Program No P2No Number Stored P1Machine SettingsType List Print P2Machine Settings Enter Programming a document storage operationOne-touch Press until the list you want appears Type Store Document Enter P2Polling Document EnterSelect F-Code Box 01Murata Machinery Select F-Code Box 03Muratec America Select Program No P1Delayed P2Erase P One-Touch Check Enter/CancelReserved ** Jun 29 2002 Select Program No P2Polling Security features PasscodeSecurity reception Protect Passcode Old Passcode Sec. Rx Active Enter PasscodeSecurity Rx Doc Enter Passcode Masking the PIN Performing batch transmission while using the PIN mask Enter PIN NumberPress Start 19725550911*123456 1Fax Number Setting Block Junk Fax Off The feature isn t activatedTo set Block Junk Fax If you selected either Mode2 or Mode3, go on to step Clearing a number from the blocked numbers list Enter Fax Number Select BlockJunk No 01555-2971Printing a list of the blocked numbers Using department codes Select Department No 001 0011555 Set Dept. Protect Enter Passcode Dept. Protect Off EnterDept. Protect Enter Enter Dept. Code Advanced features This page intentionally blank Changing the default settings Scan settings Setting E C MECM Mode Enter ECM Mode Off Enter Quick Memory transmission TTI transmission Settings for reception Print settingsMargin 00-85mm40 Margin 00-85mm38 Setting the number of rings Image Rotation Changing redial settings Settings for dialingChanging the dialing pause length Copy scan settings Settings for copyingAdjusting the copy print settings Changing the copy auto reset time Setting copy autoSetting sort copy Setting Negative/Positive Setting combine Combine OffCombine Copy Combine Ltr Auto 100% Settings for operation Setting the silent mode Setting Sleep mode Energy saving mode Primary modeSetting the paper source Setting 2-bin tray Option Printing your settings Printing a program listCopy exit Upper Enter Fax exit Lower Enter Just in case Common questions Glossary Open&Close ScanCover Reset Document Reset Document Press Start KeyClearing paper jams If an original document jams Reset the toner and drum cartridge If a printout jams inside your machineTo clear a printout jammed inside your machine Open the side cover Print quality problems Printouts have irregularities LinesPrintouts have toner smudges Printouts have white spots Troubleshooting AlarmCommand by using Just in case What it means/What to do What you see on the LCD Document Full What you see on the LCD Hang Up Phone Transport mode is not turned off Properly install the toner cartridgeOther Key Setting Reset Document Press Cancel to delete the extra numbers and then try again Your drum will need to be replaced soonYour drum cartridge doesn t work Replace it Errors Error reportsKinds of error codes Specific errors Reception errors Transmission errorsFax machine timed out while waiting for the retrain signal Someone pressed STO P at the receiving fax machine Just in case Remote machine malfunctionedWrong phone number reached Poor phone line conditions Cleaning tips Corrective cleaningCuring frequent jams in the ADF Always use good, copier-quality paper If you have unsatisfactory printout quality Cleaning the LED print headOpen the inner cover fully Common questions Re here to help youGeneral questions Sending faxes Reports What sa default?Can I transmit a document that s extra long? Receiving faxes Orking with your answering machinePolling How your fax machine works Glossary Document feeder File numberPolling operation Hub See Relay broadcasting Muratec fax machines Touch of one key. See also Autodialing and Speed-dialingA5 = ″ ⋅ ″ 148 ⋅ 210 mm A4 = ″ ⋅ 11.7″ 210 ⋅ 297 mm Normal FineSuperfine Polling is allowed to take place Just in case This page intentionally blank Appendix and index Specifications Power requirementPower consumption General Printout Miscellaneous Regulatory information Obligations Limited warrantyExclusions Changing the default settings Index Group Initialsettings Security reception AI.8 Muratec America, Inc International Parkway Suite