Just in case
5.4
Printouts have irregularities
The paper you re using may have absorbed moisture, per-
hap s due either to high humidity or water having been spilled
on the paper supply. Toner will not adhere well to wet p aper.
Replace the paper with dry p aper and try printing again.
Printouts have white and/or black
linesThe toner cartridge or drum cartridge
may be defective.
Remove the cartridges and check them for
damage.
If the problem persists, replace either or both
of the cartridges as indicated.
The LED print head may be dirty.
Using the cleaning paper, gently clean the LED print head.
The charger may be dirty.
Your machine normally cleans the charger automatically.
If other solutions fail, please contact your authorized Muratec
dealer.
Printouts have toner smudges
The toner may be unevenly distributed inside the toner car-
tridge.
Remove the toner cartridge and shake it a few times to redis-
tribute the toner inside. If the problem persists, replace the
cartridge.
The toner cartridge or drum cartridge may be defective.
Remove the cartridges and check them for damage. If the
problem persist s, replace either or both of the cartridges as
indicated.
If you find smudges on the back of the printouts, the transport
roller may be dirty.
Your machine normally cleans the transport roller automati -
cally. If other solutions fail, please cont act your authorized
Muratec dealer.
Printouts have white spots
The charger may be dirty.
Your machine normally cleans the charger automatically.
If other solutions fail, please contact your authorized Muratec
dealer.
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE