1
About Your System
Accessing System Features During Startup
The following keystrokes provide access to system features during startup.
Keystroke | Description |
|
|
<F2> | Enters the System Setup program. See "Using the System Setup |
| Program and Boot Manager" on page 25. |
<F10> | Enters System Services, which opens the Dell Unified Server |
| Configurator (USC). The Dell USC allows you to access utilities such |
| as embedded system diagnostics. For more information, see the |
| Unified Server Configurator documentation at |
| support.dell.com/manuals. |
<F11> | Enters the Boot Manager, depending on the system’s boot |
| configuration. See "Using the System Setup Program and Boot |
| Manager" on page 25. |
<F12> | Starts PXE boot. |
<Ctrl><E> | Enters the Baseboard Management Controller (BMC) or Integrated |
| Dell Remote Access Controller (iDRAC) Configuration Utility, which |
| allows access to the System Event Log (SEL) and configuration of |
| remote access to the system. For more information, see the BMC or |
| iDRAC user documentation at support.dell.com/manuals. |
<Ctrl><C> | Enters the SAS Configuration Utility. For more information, see your |
| SAS adapter documentation. |
<Ctrl><R> | Enters the RAID configuration utility. For more information, see the |
| documentation for your SAS RAID card. |
<Ctrl><S> | Enters the utility to configure NIC settings for PXE boot. For more |
| information, see the documentation for your integrated NIC. |
|
|
About Your System
11
