1Locate the faulty fan indicated by the diagnostic software.
2Turn off the system and all attached peripherals.
3Open the system. See "Opening the System" on page 50.
4Reseat the fan's power cable.
5Restart the system.
If the fan functions properly, close the system. See "Closing the System" on page 51.
6If the fan does not function, turn off the system and install a new fan. See "Cooling Fans" on page 74.
7Restart the system.
If the problem is resolved, close the system. See "Closing the System" on page 51.
If the replacement fan does not operate, see "Getting Help" on page 119.
Troubleshooting System Memory
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
NOTE: Invalid memory configurations can cause your system to halt at startup without video output. See General Memory Module Installation Guidelines and verify that your memory configuration complies with all applicable guidelines.
1If the system is operational, run the appropriate online diagnostic test. See "Running the System Diagnostics" on page 111.
If diagnostics indicates a fault, follow the corrective actions provided by the diagnostic program.
2If the system is not operational, turn off the system and attached peripherals, and unplug the system from the power source. Wait at least 10 seconds and then reconnect the system to power.
3Turn on the system and attached peripherals and note the messages on the screen.
104
Troubleshooting Your System
