Dell R210 II owner manual IDRAC6 Configuration Utility, Entering the iDRAC6 Configuration Utility

iDRAC6 Configuration Utility

The iDRAC6 Configuration Utility is a pre-boot configuration environment that allows you to view and set parameters for the iDRAC6 and for the managed server.

The iDRAC6 Configuration Utility provides the following features:

•Enables fault logging and SNMP alerting

•Provides access to system event log and sensor status

•Allows control of system functions including power on and off

•Functions independently of the system’s power state or the system’s operating system

•Provides text console redirection for system setup, text-based utilities, and operating system consoles.

In addition, the iDRAC6 Configuration Utility enables you to:

•Configure, enable, or disable the iDRAC6 local area network through the dedicated iDRAC6 Enterprise card port or the embedded NIC1.

•Enable or disable IPMI over LAN.

•Enable a LAN Platform Event Trap (PET) destination.

•Attach or detach the Virtual Media devices.

•Change the administrative user name and password and manage user privileges.

•View System Event Log (SEL) messages or clear messages from the log.

For additional information on using iDRAC6, see the documentation for iDRAC6 and systems management applications at support.dell.com/manuals.

Entering the iDRAC6 Configuration Utility

1Turn on or restart your system.

2Press <Ctrl><E> when prompted during POST.

If your operating system begins to load before you press <Ctrl><E>, allow the system to finish booting, and then restart your system and try again.

Using the System Setup Program and Boot Manager

45