Entering the System Setup Program
1Turn on or restart your system.
2Press <F2> immediately after you see the following message:
<F2> = System Setup
If your operating system begins to load before you press <F2>, allow the system to finish booting, and then restart your system and try again.
Responding to Error Messages
If an error message appears while the system is booting, make a note of the message. See "System Messages" on page 19 for an explanation of the message and suggestions for correcting errors.
NOTE: After installing a memory upgrade, it is normal for your system to display a message the first time you start your system.
Using the System Setup Program Navigation Keys
Keys | Action |
|
|
Up arrow | Moves to the previous field. |
Down arrow or <Tab> | Moves to the next field. |
<Enter>, Spacebar, <+>, or | Cycles through the settings in a field. In many |
fields, you can also type the appropriate value. | |
<Esc> | Exits the System Setup program and restarts the |
| system if any changes were made. |
<F1> | Displays the System Setup program's help file. |
|
|
NOTE: For most of the options, any changes that you make are recorded but do not take effect until you restart the system.
26
Using the System Setup Program and Boot Manager
