Section 4 - Chapter 4 - OkiNet for TCP/IP
Configuring TCP/IP Options
To configure options specific to the TCP/IP protocol, select the TCP/IP tab. The following screen will display:
Fill in the following information:
IP Address Resolution
•Set Permanent - Select this option to make the IP address permanent. If the OkiLAN 6120e has been configured to remember its IP address, it does not need to determine its address each time it is powered on.
Enter the IP address for the OkiLAN 6120e. The IP address must follow the format XXX.XXX.XXX.XXX, where each XXX is a number from 0 to 255.
CAUTION: If you select an invalid IP address, you may not be able to access the OkiLAN 6120e.
•Use Network Protocol - Select this option to use RARP, BOOTP or DHCP to determine the IP address at power up. Specify which protocol(s) to use.
TCP/IP
OKI OkiLAN 6120e User’s Guide | IV - 25 |
