Section 3 - Chapter 4 - Using the OkiLAN 6120e in NDPS
Chapter 4
Using the OkiLAN 6120e in NDPS (NetWare 4.x , 5.1 or Higher)
Introduction
Novellâ Distributed Print Servicesä (NDPSâ) is Novell’s new printing architecture for use with NetWare versions 4.x, 5.1 and higher. To use the OkiLAN 6120e in NDPS, you must add the OKI printer driver(s) to the NDPS Broker.
Requirements:
·IP Address on the file server
·IP address on the print server
·The client must also run the most current version of the NetWare client to get the NDPS objects.
Note: The client printing to the printer does not need an IP address.
Note: If you are using NetWare 5.1x or higher in TCP/IP, a quicker setup procedure is described in Setting Up the OkiLAN 6120e in NetWare 5.1x or Higher in TCP/IP below.
Adding the OKI Printer Driver Using the NDPS Broker
Printer drivers cannot be installed to the Resource Management Service from multiple floppy disks. If a printer driver is shipped on more than one disk, copy the files to a directory on a hard drive or network drive and install the driver from there. Any problems in adding the driver should be addressed to the OKI Customer Service Center.
1.In NetWare Administrator,
2.Click the Resource Management Service (RMS) tab.
3.Make sure the Resource Management Service is enabled.
4.Click Add Resources to display the Manage Resources dialog box.
5.Select the icon for the type of printer driver that you want to add under the Resource Types window.
A complete list of currently loaded printer drivers of that type appears in the Current Resources window.
NetWare
OKI OkiLAN 6120e User’s Guide | III - 33 |
