Section 3 - Chapter 2 - OkiNet for NetWare
•PostScript - Inserts the appropriate character string in front of each print job to switch the printer to the PostScript printer language.
•Automatic - Enables the auto language sensing function. This function examines the print job data stream and determines the required print language and inserts the appropriate character string in front of each print job to switch the printer to the appropriate printer language.
Note: If you are not switching languages or the printer can switch languages automatically, this option should be set to OFF.
Printer Type
The Printer Type selection is used to determine the actual character string required for your printer. If your printer type is not listed, select Other and enter the character string for switching the printer to PCL or PostScript mode.
To enter nonprintable characters, enclose the ASCII value of the character in angle brackets. For example, to enter the ESC character type: <27>.
PCL Switch Sequence
Enter the character string to switch the printer to the PCL print language.
PostScript Switch Sequence
Enter the character string to switch the printer to the PostScript print language.
Configuration Page Language
Select the appropriate printer language for printing configuration pages on your printer.
Note: Do not set the Configuration Page Language to OFF for all ports of your OkiLAN 6120e. If a configuration sheet cannot be printed, troubleshooting abilities are limited.
III - 12 | OKI OkiLAN 6120e User’s Guide |
