Oki 6120E manual Type lpsystem -t bsd Okiprinter, Type accept lj4 Type enable lj4

Section 4 - Appendix B - Application Considerations

Prerequisites

Before you proceed, the following prerequisites must be met:

1.The name OKIPRINTER and the IP address assigned to the OkiLAN 6120e are in the “/etc/hosts” file on the Solaris system.

2.Make sure the LPD daemon is running on the Solaris system.

Procedure

To configure the Solaris machine so users can spool print jobs to the pcl print queue on the OkiLAN 6120e named OKIPRINTER, do the following:

1.Login to the Solaris machine as root.

2.Type: lpsystem -t bsd OKIPRINTER.

3.Type: lpadmin -p lj4 -s OKIPRINTER!yourqueuename - I any.

4.Type: accept lj4.

5.Type: enable lj4.

6.Try printing by issuing the following command: lp -d lj4 filename

IV - 78 OKI OkiLAN 6120e User’s Guide