Section 4 - Appendix B - Application Considerations
6.Start the qdaemon by typing:
AIX> startsrc -s qdaemon
7.Try printing to the printer attached to the OkiLAN
6120e by issuing the following command:
AIX> lpr -Plj4 filename
Configuring Solaris 2.x for Printing with the OkiLAN 6120e
This application note describes the configuration of the printing system on the Solaris ver. 2.x UNIX operating system. For clarity and brevity, the following specific names will be used to represent general devices or concepts.
•lj4 - The local queue name on the Solaris system to which print jobs that are destined for a printer attached to the OkiLAN 6120e will be directed.
•OKIPRINTER - The host name of the remote system which is the OkiLAN 6120e. For example, to telnet to the OkiLAN 6120e and invoke the OkiLAN 6120e Configuration utility, you would type telnet OKIPRINTER. A host name is not required for the OkiLAN 6120e, the IP Address may be used.
•yourqueuename - This is the name of the queue on the OkiLAN 6120e and must end with 1, 2, 3 or 4, depending on the port selected to service the print jobs.
If FF, LF or NF are the last two letters of the queue name, the job will be converted accordingly. See pages
TCP/IP
OKI OkiLAN 6120e User’s Guide | IV - 77 |
