Oki 6120E manual Introduction, Before You Start

Section 3 - Chapter 1 - Introduction

Chapter 1: Introduction

Overview

This section contains instructions and information on how to configure your OkiLAN 6120e in the NetWare environment.

There are three environments in which to configure the OkiLAN 6120e:

•Bindery (NetWare 3.x)

•NetWare Directory Services (NDS)–for NetWare versions 4.1 and later

•NDPS for NetWare 4.x and 5.x.

Before You Start

•You should be familiar with network administration as well as the physical setup and operation of your network.

•Write down the serial number and the Ethernet or Token-Ring address of your OkiLAN 6120e. You will find these numbers on the OkiLAN 6120e enclosure.

•Install the OkiLAN 6120e hardware and connect the cabling-see Section I. Instructions for hardware installation are found in Section I of this manual.

•Install the OkiNet Utility for NetWare–see Section I.

III - 4 OKI OkiLAN 6120e User’s Guide