Section 6 - Chapter 1 - OkiLAN 6120e Setup for Windows NT
Note: To obtain a version of OkiLAN 6120e Connect for DLC that supports Windows NT, visit our FTP site (ftp://ftp.extendsys.com/pub/ printserver/utilities/) or contact Technical Support.
Configure Port
If you have printing problems while using the OkiLAN 6120e Connect printing port, you may check the status of the port by selecting Configure Port under the Ports tab in the Properties screen.
Notify On Printer Error
This feature will check the printer status prior to printing the job. If a printer error is detected (e.g. printer
Notify When Printed
This feature will provide an alert when your job is active on the printer. This may be useful if the printer is especially busy.
Description
An optional field where you may list the location or other useful information about the printer port.
Using the Windows NT 4.0 LPR Print Monitor
A Microsoft LPR print monitor is shipped with Windows NT 4.0. This print monitor is not included in the default Windows NT installation; therefore, it will need to be installed. In order to set up an LPR printer in Windows NT 4.0, the system must have an IP address, the print server must have an IP address, and Microsoft TCP/IP printing must be installed.
VI - 6 | OKI OkiLAN 6120e User’s Guide |
