Section 4 - Chapter 4 - OkiNet for TCP/IP
Restoring Factory Default Settings
To restore the OkiLAN 6120e to factory default settings, select the OkiLAN 6120e from the list of available print servers. From the Print Server menu bar, select Reset.
From the Reset Print Server screen, choose one or more of the following options:
Output Ports
Restores settings related to output ports such as port name and output type.
TCP/IP
Restores settings specific to the TCP/IP protocol configuration such as the IP address and subnet mask.
NetWare
Restores settings specific to the NetWare protocol configuration such as the mode and default file server.
Banyan VINES
Restores settings specific to the VINES protocol configuration such as user name and print service names (may apply to other OkiLAN print server models).
EtherTalk
Restores settings specific to the EtherTalk protocol configuration such as the name and zone.
Once you have chosen the desired options, select Restore. To completely restore the print server to factory default settings, select all items in the list.
CAUTION: Make sure there are no active print jobs when you select Restore Factory Defaults. If you reset the OkiLAN 6120e while a job is printing, the job may not print successfully.
TCP/IP
OKI OkiLAN 6120e User’s Guide | IV - 35 |
