Oki 6120E manual Ps -e grep rlp, Kill -15 processnumber, Printer 515/tcp spooler, Etc/inetd -c

Section 4 - Appendix B - Application Considerations

2.Make sure the rlp process is not running by typing at the UNIX prompt:

ps -e grep rlp

If rlp is not running, you will not see any output after executing this command.

If rlp is running (that is, if you see output after executing this command), kill the process with the command:

kill -15 process_number

3.Make sure the following entry is in the “etc/inetd.conf” file:

printer stream tcp nowait root /usr/lib/ rlpdaemon rlpdaemon -I

If the rlp daemon is not running when a print request is made, this entry in “/etc/inetd.conf” tells inetd to auto-start the rlp daemon to service the pending print request. This is helpful if the daemon was terminated for some reason. For more information on inetd or “/ etc/inetd.conf”, type man inetd or man inetd.conf.

4.Make sure the following entry is in the “/etc/services” file

printer 515/tcp spooler

5.Start inetd by typing the following at the UNIX prompt:

/etc/inetd -c

Procedure

HP-UX uses an interactive utility called SAM (System Administration Manager) to configure printing. To configure printing using SAM, do the following:

1.Login to the HP-UX system as root.

2.Invoke the SAM utility by typing sam at the UNIX prompt. (We suggest you do this at the system console. SAM uses a screen oriented interface that works best at the console.)

IV - 64 OKI OkiLAN 6120e User’s Guide