Section 4 - Chapter 3 - TCP/IP Configuration and Printing
TYPE Changes the representation type used for data transfer. Image (or binary) and ASCII are the only types supported.
ASCII Equivalent to “TYPE ASCII.”
BINARY Equivalent to “TYPE BINARY.”
IMAGE Equivalent to “TYPE IMAGE.”
STRU Specifies file structure. File is the only structure supported.
MODE Specifies transfer mode. Stream is the only transfer mode supported.
OPEN Opens connection to remote host. CLOSE Terminates FTP session.
QUIT Terminates FTP session and exits FTP.
BYE Equivalent to QUIT.
With the exception of the OkiLAN 6120e 100 series, OkiLAN 6120e print servers will allow one FTP connection. If more FTP connections are attempted, the OkiLAN 6120e will reject the connection until one of the other FTP connections is closed. When an FTP connection is rejected, the FTP program will typically display a message like the following:
$ ftp<CR>
ftp> open OkiLAN 6120e_name<CR> connection refused
ftp>
Note: Specifying binary mode is important for all jobs. Most FTP implementations default to ASCII mode. This may cause unexpected or undesired printing results.
IV - 20 | OKI OkiLAN 6120e User’s Guide |
