Section 6 - Chapter 1 - OkiLAN 6120e Setup for Windows NT
Installation
To install OkiLAN 6120e Connect for TCP/IP, follow the instructions below:
1.Install the OkiLAN 6120e Connect for TCP/IP files - see Section I.
2.When installation is complete, click on Start, Settings and then Printers.
3.Select the Windows printer from which you would like to print with the OkiLAN 6120e Connect, then select Properties from the menu.
4.Add an OkiLAN 6120e Connect port. This may be done by selecting Add Port under the Ports tab.
5.From the list of Available Printer Ports, select OKI OkiLAN 6120e Connect IP Monitor as the type of port to add and click New Port.
You will enter into the Add OkiLAN 6120e Connect Port screen where there will be a list of all OkiLAN 6120e print servers available on the local subnet.
6.If the port you wish to add is listed in the Ports available on local subnet: window, select the port name and click Add.
If the port you wish to use is not listed, click the Locate
VI - 4 | OKI OkiLAN 6120e User’s Guide |
