Oki 6120E manual Hardware Error Messages

Section 4 - Appendix A - Troubleshooting

OkiNet for TCP/IP - Winsock Errors

•If you see an error before OkiNet for TCP/IP appears on the screen, try setting a host name in the host’s file in the Windows directory (check the documentation for your Windows TCP/IP stack).

•If you have difficulty seeing a particular OkiLAN 6120e, try moving the device onto the same subnet as the computer running the utility.

•If OkiNet for TCP/IP gives you the Winsock error: Could not bind to socket, use the Special Options dialog under the File menu to change the Discovery UDP Port to a different port number.

Hardware Error Messages

ST: Cable not connected

Self-test has determined that the network cable is not connected.

•Check the cable connection to the OkiLAN 6120e.

•Move the OkiLAN 6120e to another known working node.

If you find the cable is connected and you are still receiving this message or any other “ST:” error message, power cycle the OkiLAN 6120e. If the error continues, call Oki Data Customer Support at 1-800-OKI-DATA (1-800-654-3282).

System CRC Failed

The OkiLAN 6120e has failed.

•Power cycle the OkiLAN 6120e once. If the error continues, call Oki Data Customer Support at 1-800-OKI-DATA (1-800-654-3282).

TCP/IP

OKI OkiLAN 6120e User’s Guide IV - 53