
Section 6 - Chapter 1 - OkiLAN 6120e Setup for Windows NT
Chapter 1
OkiLAN 6120e Set Up for
Windows NT 4.0/2000
Overview
This section contains instruction and information on how to set up your OkiLAN 6120e for a Windows NT 4.0/2000 environment. Print options for Windows NT 4.0/2000 include:
•OkiLAN 6120e Connect for IP
•OkiLAN 6120e Connect for DLC
•LPR
OkiLAN 6120e Connect for IP
OkiLAN 6120e Connect for TCP/IP is a full featured utility that allows simple, direct, TCP/IP printing from your computer to a printer attached to an OKI TCP/IP enabled print server. OkiLAN 6120e Connect has advantages over other TCP/IP printing options. It allows you to print to print servers that are using Dynamic IP addresses (DHCP). It will also notify you immediately in the event of a printer error (e.g. Paper out). Print jobs printed through OkiLAN 6120e Connect are sent directly to the OkiLAN 6120e print server and not routed through a network server, resulting in a reduction of network traffic.
System Requirements
To use OkiLAN 6120e Connect for TCP/IP for your Windows NT 4.0/2000 operating system, your computer must be configured to run TCP/IP. The OkiLAN 6120e print server must also be configured to run TCP/IP.
Windows Printing
OKI OkiLAN 6120e User’s Guide | VI - 3 |