Oki 6120E manual Configuring HP-UX v10.xx for Printing with the OkiLAN 6120e, Lp -d lj4 filename

Section 4 - Appendix B - Application Considerations

h)Allow anyone to cancel requests. Check if desired.

i)Remote printer is on a BSD system. Check this box.

Tells the HP-UX system that it is communicating with a Berkeley style remote printer (such as LPD).

5.Select the OK button. A status window will outline the tasks performed to install the queue. When you see the message task completed, select OK.

6.Pull down the Lists menu and select Exit.

7.Select the Exit SAM button.

8.Test printing to the OkiLAN 6120e with the following command:

lp -d lj4 filename

Configuring HP-UX v10.xx for Printing with the OkiLAN 6120e

This application note describes the configuration of the printing system on the HP-UX ver. 10.xx of the UNIX operating system. For clarity and brevity, the following specific names will be used to represent general devices or concepts.

•lj4 - The local queue name on the HP-UX system to which print jobs will be directed. The print jobs are destined for a printer attached to the OkiLAN 6120e.

•OKIPRINTER - The host name of the remote system which is the OkiLAN 6120e. For example, to telnet to the OkiLAN 6120e and invoke the OkiLAN 6120e Configuration utility, you would type telnet OKIPRINTER. A host name is not required for the OkiLAN 6120e, the IP Address may be used.

TCP/IP

OKI OkiLAN 6120e User’s Guide IV - 69