Section 4 - Chapter 1 - Introduction
Chapter 1
Introduction
Overview
This section contains instructions and information on how to configure your OkiLAN 6120e. You will also be instructed on how to set up your host computers to print to the OkiLAN 6120e using the TCP/IP protocol.
OkiLAN 6120e supports TCP/IP methods for printing:
•Remote Line Printer Daemon (LPD)
•File Transfer Protocol (FTP)
•Printing directly through a TCP port (Raw Port Printing)
Additionally, if the DHCP protocol is enabled as a default, the print server may be accessed through an ordinary Internet Web browser, such as Netscape Navigator, or by using TELNET. See Chapters 5 and 6 in this section.
Software Requirements
The OkiLAN 6120e may be configured for TCP/IP using the OkiNet for TCP/IP utility, or from a computer supporting the OkiNet for NetWare utility, Banyan VINES OkiNet for VINES utility (may apply to other OkiLAN print server models), OR telnet and one of the following:
•Manual arp table entry and ping
•Static route entry using route add command
•DHCP
•RARP
•BOOTP
TCP/IP
OKI OkiLAN 6120e User’s Guide | IV - 5 |
