Section 6 - Chapter 2 - OkiLAN 6120e Setup for Windows 95/98
Chapter 2
OkiLAN 6120e Set Up for Windows 95/98
Overview
This section contains instruction and information on how to set up your OkiLAN 6120e for a Windows 95/ 98 environment. Print options for Windows 95/98 include:
•OkiLAN 6120e Connect for TCP/IP
•OkiLAN 6120e Connect for DLC
•OkiLAN 6120e Connect for IPX/SPX
OkiLAN 6120e Connect for TCP/IP
OkiLAN 6120e Connect for TCP/IP is a full featured utility that allows simple, direct, TCP/IP printing from your computer to a printer attached to an OKI TCP/IP enabled print server. With OkiLAN 6120e Connect, you can even print to print servers using Dynamic IP addresses (DHCP). Print jobs printed through OkiLAN 6120e Connect are sent directly to the OkiLAN 6120e print server and not routed through the network server, resulting in a reduction of network traffic.
System Requirements
To use OkiLAN 6120e Connect for TCP/IP, your operating system must be Windows 95/98 and your computer must be configured to run TCP/IP. The OkiLAN 6120e print server must also be configured to run TCP/IP.
Installation
To install OkiLAN 6120e Connect for TCP/IP:
1.Install the OkiLAN 6120e Connect for
2.When installation is complete, click on Start, Settings and then Printers.
VI - 10 OKI OkiLAN 6120e User’s Guide
