Troubleshooting

Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance

(see Assistance).

 

EN

 

 

 

 

 

 

 

Problem:

Possible causes / Solutions:

 

 

 

 

 

 

The dishwasher does not start or

• Switch off the appliance by pressing the ON/OFF button, switch it back on after

 

 

cannot be controlled

approximately one minute and reset the program.

 

 

 

• The appliance has not been plugged in properly.

 

 

 

• The dishwasher door has not been shut properly.

 

 

 

 

 

 

The door won’t close

• The lock was released. Strongly push the door until a “clacking” noise is heard.

 

 

 

 

 

 

No water drains out from the

• The dishwasher cycle has not yet finished.

 

 

dishwasher.

• The water inlet hose is bent (see Installation).

 

 

 

• The drain duct is blocked.

 

 

 

• The filter is clogged up with food residues.

 

 

 

 

 

 

The dishwasher makes excessive

• The dishes are rattling against each other or against the sprayer arms.

 

 

noise.

• An excessive amount of foam has been produced: the detergent has not been

 

 

 

measured out correctly or it is not suitable for use in dishwashers (see Start-up

 

 

 

and use).

 

 

 

 

 

 

The dishes and glasses are

• The level of the refined salt is low or the dosage setting is not suited to the

 

 

covered in a white film or

hardness of the water (see Rinse aid and salt).

 

 

limescale deposits.

• The lid on the salt dispenser is not closed properly.

 

 

 

• The rinse aid has been used up or the dosage is too low.

 

 

 

 

 

 

The dishes and glasses are

• The rinse aid dosage is too high.

 

 

streaked or have a bluish tinge.

 

 

 

 

 

 

 

The crockery has not been dried

• A wash cycle without a drying program has been selected.

 

 

properly.

• The rinse aid has been used up or the dosage is too low (see Rinse aid and

 

 

 

salt).

 

 

 

• The rinse aid dispenser setting is not suitable.

 

 

 

• The crockery is made from non-stick material or plastic.

 

 

 

 

 

 

The dishes are not clean.

• The racks are overloaded (see Loading the racks).

 

 

 

• The crockery has not been arranged well.

 

 

 

• The sprayer arms cannot move freely.

 

 

 

• The wash cycle is too gentle (see Wash cycles).

 

 

 

• An excessive amount of foam has been produced: the detergent has not been

 

 

 

measured out correctly or it is not suitable for use in dishwashers (see Start-up

 

 

 

and use).

 

 

 

• The lid on the rinse aid compartment has not been shut correctly.

 

 

 

• The filter is dirty or blocked (see Care and maintenance).

 

 

 

• The refined salt level is low (see Rinse aid and salt).

 

 

 

 

 

 

The dishwasher does not take any

• There is no water in the mains supply.

 

 

water in - Tap shut-off alarm

• The water inlet hose is bent (see Installation).

 

 

(several short beeps are emitted)

• Turn on the tap and the appliance will start after a few minutes.

 

 

(the ON/OFF indicator light flashes

• The appliance lock has been activated because no action was taken when the

 

 

and the number 6 appears on the

beeps sounded.

 

 

display).

Switch off the appliance using the ON/OFF button, turn on the tap and switch

 

 

 

the appliance back on after 20 seconds by pressing the same button. Re-

 

 

 

program the appliance and restart the wash cycle.

 

 

 

 

 

 

Water inlet hose alarm / Water inlet

• Switch off the appliance by pressing the ON/OFF button. Shut off the water tap

 

 

filter blocked

to eliminate the risk of flooding and remove the plug from the electrical socket.

 

 

(the ON/OFF indicator light flashes

Make sure the water inlet filter has not become blocked by impurities (see “Care

 

 

and the number 7 appears on the

and maintenance” chapter).

 

 

display).

 

 

 

 

 

 

*Only available in selected models.

13

Page 12 Page 14
Page 13
Image 13
Hotpoint LFT 228 manual Troubleshooting
Page 12 Page 14

LFT 228 specifications

The Hotpoint LFT 228 is a built-in dishwasher that stands out in the realm of kitchen appliances with its innovative features, reliable performance, and sleek design. This model is particularly designed for households seeking efficiency and convenience without sacrificing style.

One of the most prominent features of the Hotpoint LFT 228 is its impressive capacity. With a place setting for up to 14 meals, it caters to large families and those who often entertain guests. The adjustable shelves and folding plate racks further enhance its versatility, allowing users to customize the interior space to accommodate larger pots and pans with ease.

In terms of energy efficiency, the LFT 228 boasts an A+ rating, indicating an environmentally friendly design that helps in reducing energy consumption while still delivering exceptional cleaning power. This model is equipped with several wash programs tailored to different needs, including Intensive, Eco, and Rapid cycles. The Eco option is particularly popular for those looking to save on water and energy while effectively cleaning everyday dishes.

The dishwasher also features Hotpoint’s innovative technology, including the "Intensive Zone," which focuses on tougher stains in the lower basket while lightly cleaning delicate items above. This ensures that every dish, regardless of size or degree of soiling, comes out spotless. Additionally, the "Half Load" function allows users to run the dishwasher with either the upper or lower basket, further enhancing energy savings.

Noise levels are another crucial consideration when choosing home appliances. The Hotpoint LFT 228 operates at a low decibel level, making it among the quieter dishwashers on the market. This ensures a peaceful kitchen environment, even during operation.

The user-friendly interface of the dishwasher is also noteworthy, featuring a clear LED display that simplifies operation and allows users to choose settings with ease. The delay start function is an added convenience, enabling users to program the dishwasher to run at a time that suits their schedule.

Overall, the Hotpoint LFT 228 is a well-rounded dishwasher that combines modern technology with practical design. Its various features, energy efficiency, and user-friendly interface make it a compelling choice for any household looking to enhance their kitchen experience with reliable and effective dishwashing solutions.
Top Page Image Contents