Panasonic KX-TG5230C Programmable Settings, Programming Guidelines Handset, Press Menu

Programmable Settings

Programming Guidelines Handset

This unit has several programmable functions which can be selected from the function menu on the display (p. 15).

The soft key works	BACK SAVE
as the BACK key.

The soft key works as

the SELECT or SAVE key.

	[OFF] exits
	programming.
Navigator key scrolls	[MENU] enters the
through the menu.
	function menu.

How to select a function item from the menu

Make sure the handset and base unit are not being used. The handset must be operated near the base unit and while off the base unit.

1Press [MENU].

• The main menu is displayed (p. 15).

B

Ringer setting

d

BACK PLAY SELECT

2Scroll to the desired item by pressing [d] or [B].

3Press the soft key ( SELECT ) to select the desired item.

4If the item has a sub-menu, select the menu item (p. 15). Repeat steps 2 and 3 until the desired item is displayed. If the item has no sub-menu, go to step 5.

5Select the desired setting by pressing [d] or [B], then press the soft key ( SAVE ).

•A confirmation tone will be heard and the setting will be saved.

dB

BACK PLAY SAVE

6 Press [OFF] to exit programming mode.

•To go back to the previous menu, press the soft key ( BACK ), or press the soft key ( SELECT ) while “---(Goback)----” is displayed. If you press this key in the main menu, the unit will exit programming mode.

•After programming is complete, the display will return to the main menu or the sub-menu depending on the menu in which the selected item is located. (See the menu table on page 15.)

•You can exit programming mode at any time by pressing [OFF].

•If you do not press any button for 60 seconds, the unit will exit programming mode.

•If the unit detects a problem, an error message will be displayed (p. 71–73) and/or error beeps will sound.

14