If the Following Appears on Your Display...

Display message

 

 

Cause & Remedy

 

 

Phone book full

When you tried to store an item in the phone book,

the phone book memory was full. Press [OFF] to exit

programming mode. To erase other items from the

 

phone book, see page 39.

 

 

---Incomplete---

When the displayed item was sent to the destination

Tom Jones

handset, the phone book memory was full and

098-765-4321

copying stopped. If you tried to send all of the items,

Phone book full

the item displayed with “Incomplete” and items after

(The name/number is

an example.)

it have not been copied to the destination handset.

 

Press [OFF] to exit (p. 40, 41). To erase items from

 

the destination handset phone book, see page 39.

 

You can copy all of the items again or copy the items

 

which have not been copied one by one (p. 40, 41).

 

 

---Incomplete---

The destination handset is out of area.

Tom Jones

The destination handset user may have pressed

555-765-4321

C

s

].

(The name/number is

[ ] or [

 

 

 

 

an example.)

 

 

 

 

 

Phone book

Your phone book is empty. No items were copied to

the destination unit.

No items stored

 

 

 

Denied

destination handset or base unit and it cannot be

 

The Room Monitor feature is turned off on the

 

used for monitoring (p. 50).

 

The called handset was on the base unit. The

 

handset must be off the base unit to be monitored.

 

 

Invalid.

The handset you tried to call has not been registered

Please register

to the base unit. Register the handset (p. 70, steps 5

to the base unit

and 6).

 

 

 

 

Store VM access#

number (p. 52).

 

A voice mail access number is not stored. Store the

Error!!

4 handsets have already been registered to the base

4 handsets have

unit. To cancel a handset’s registration, see page 69.

already been

You may have registered one of your handsets to

registered.

another base unit without deleting its registration to

 

this base unit. Erase the handset’s registration from

 

the base unit. For the KX-TG5230C base unit:

 

(1) Press and hold [LOCATOR/INTERCOM/

 

TRANSFER] for 3 seconds, and (2) Press and hold

 

the handset number [1] ( ) to [4] ( ) that you do

 

not want for 5 seconds. A long beep sounds, then the

 

handset number is erased.

 

 

 

 

72

Page 72
Image 72
Panasonic KX-TG5230C Denied, If the Following Appears on Your Display, Phone book full, No items stored