Panasonic KX-TG5230C operating instructions Press f or g repeatedly to select the desired tone

Programmable Settings

Base unit ringer tone (use either the handset or the base unit)

Base Unit

Make sure the base unit is not being used.

1Press [f] or [g].

•The base unit will ring using the current ringer tone. If the ringer volume has been turned off, the base unit will not ring (p. 19).

2Press [f] or [g] repeatedly to select the desired tone.

•Each time you press [f] or [g], another ringer tone will be heard and selected.

•To stop ringing, press [0].

•You can also select the ringer tone by pressing [1] to [7]. [1] to [3]: Bell ringer patterns

[4]to [7]: Melody patterns

Selecting the base unit ringer tone by using the Handset

1Press [MENU].

2	Scroll to “Initial setting” by pressing
								Initial setting
	[d] or [B], then press the soft key (						).
					SELECT
3	Scroll to “Set base unit” by pressing [d]
								Set base unit
	or [B], then press the soft key (					).
				SELECT
4	Press the soft key (		) at “Ringer
		SELECT
								Ringer tone
	tone”.
5	Select the desired ringer tone by pressing
								Ringer tone
	[d] or [B].							1:Tone 1
	• When selecting the ringer tone, the base unit will
	ring. If the base unit ringer volume has been
	turned off, the base unit will not ring (p. 19).
	• You can also select the ringer tone by pressing

[1]to [7].

[1]to [3]: Bell ringer patterns

[4]to [7]: Melody patterns

6Press the soft key ( SAVE ), then press [OFF].

Preparation

21