Panasonic KX-TG5230C 1Tone, Programmable Settings Ringer Tone, Handset ringer tone Handset

Programmable Settings

Ringer Tone

You can set the handset and base unit ringers to use one of 7 ringer patterns for outside calls. “Tone 1” to “Tone 3” are bell ringer patterns. “Melody 1” to “Melody 4” are melody patterns. The factory preset is “Tone 1”.

•You cannot change the ringer tone for intercom calls.

•If you subscribe to a Distinctive Ring Service from your telephone company with 2 or 3 distinct rings, select a bell ringer pattern (Tone 1 to 3). If you select a melody pattern, you will not be able to distinguish lines by their ringers.

•If you select one of the melody ringer patterns, the ringer will continue to sound for several seconds if:

—the caller hangs up before you answer the call, or

—another person answers the call using another phone connected on the same line.

Handset ringer tone Handset

1Press [MENU].

2	Press the soft key (		) at “Ringer
		SELECT				Ringer setting
	setting”.
3	Scroll to “Ringer tone” by pressing [d] or
						Ringer tone
	[B], then press the soft key (				).
				SELECT
4	Select the desired ringer tone by pressing
						Ringer tone
	[d] or [B].					1:Tone 1
	• The handset will ring and the ringer tone will
	change. If the ringer volume has been turned off,
	the handset will not ring (p. 18).
	• You can also select the ringer tone by pressing
	[1] to [7].

5Press the soft key ( SAVE ), then press [OFF].

20