Panasonic KX-TG5230C operating instructions Intercom Voice Paging Base Unit

Intercom

Voice Paging Base Unit

The base unit user can make a voice announcement that is heard through the speakers of all handsets.

•When 4 handsets are registered to the base unit, and if one handset user is in conversation using the Booster feature, 1 of the remaining 3 handsets will not receive the voice announcement.

1Press [LOCATOR/INTERCOM/TRANSFER].

•The LOCATOR/INTERCOM/TRANSFER and SP-PHONE indicators light.

2To make a voice announcement to all handsets, press [5] ( ).

•You will hear a ringback tone (two short beeps) and the SP-PHONE indicator flashes.

3When the SP-PHONE indicator stops flashing, speak into the MIC.

•All handset users will hear your voice through their speakers after beeps, “Call from Base” will be displayed and the Ringer/Message Alert indicator will flash rapidly on the handsets.

•The handset on the base unit will not be paged.

4When finished, press [SP-PHONE] or [LOCATOR/INTERCOM/ TRANSFER].

OR

After one of the handsets answers, speak into the MIC. To disconnect the intercom, press [SP-PHONE]or

[LOCATOR/INTERCOM/TRANSFER].

•Only the handset user who answers first can talk with the base unit user.

•To answer the page from a handset, see “Answering Intercom Calls” on page 44.

•If a handset is too close to the base unit, you may hear feedback while making the voice announcement. Place the handset on the base unit (or the charger, for accessory handset users, p. 3) or press [OFF].

•It is not possible to specify which handset(s) will hear the voice announcement.

•The announcement is heard at the handset ringer volume (p. 18).

Telephone System Advanced Operation

45