Panasonic KX-TG5230C Cancelling Registration/Re-registration, Handset 2 Registered

Cancelling Registration/Re-registration

Make sure the base unit and the other handsets are not being used. Have both the handset and base unit nearby during registration.

If you have cancelled handset registration at a previous base unit (p. 69), start from step 5.

1	Handset: Press [MENU].
2	Handset: Scroll to “Initial setting” by
				Initial setting
	pressing [d] or [B], then press the soft key
	(	SELECT	).

3Handset: Scroll to “Registration” by pressing [d] or [B], then press the soft key ( SELECT ).

Registration

4 Handset: Press the soft key ( SELECT ) at “HS	HS registration
registration”.

5Base unit:

Press and hold [LOCATOR/INTERCOM/TRANSFER] for 3 seconds.

•The CHARGE indicator flashes. After the CHARGE indicator starts flashing, the rest of the procedure must be completed within 1 minute.

6Handset:

(1)Press the soft key ( O K ).

(2)Wait until a long beep sounds and the display shows the new extension number (e.g. extension number 2).

• Registration is complete.

Press LOCATOR on base unit for 3 sec.

Then press OKL

BACK O K

IN USE SPIPRIVACY1[2]

Handset [2] Registered

•You can stop registration by pressing [OFF] on the handset and pressing [LOCATOR/INTERCOM/TRANSFER] on the base unit.

•If “Wrong handset Refer to manual” is displayed, the handset you tried to register is for KX-TG6500C base unit, not the KX-TG5230C base unit included with this system. The accessory handsets for this base unit are KX-TGA520C and KX-TGA523C.

If you have not cancelled the handset’s registration at the previous base unit (p. 69), the handset number remains in that base unit’s memory. To erase the handset number from the previous base unit, see the base unit’s Operating Instructions. For the KX-TG5230C base unit: (1) Press and hold [LOCATOR/ INTERCOM/TRANSFER] for 3 seconds, and (2) Press and hold the handset number [1] ( ) to [4] () that you do not want for 5 seconds. A long beep sounds, then the handset number is erased.

70