Panasonic KX-TG5230C operating instructions Installation, Connections

Installation

Connections

Raise the antennas.

Fasten the AC adaptor cord.

Hook

Preparation

Bottom of the base unit

Single-Line Telephone Jack (CA11A)

Telephone

Line Cord Noise Filter

(For DSL users)

Power Outlet (AC 120 V, 60 Hz)

AC Adaptor

•USE ONLY WITH Panasonic AC ADAPTOR PQLV1.

•The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

•If your unit is connected to a PBX which does not support Call Display and voice mail services, you cannot access those services.

•This unit will not function during a power failure. We recommend connecting a standard telephone to the same telephone line or to the same telephone jack using a T-adaptor.

•If the unit is connected to a telephone line with DSL service, you may hear noise from the receiver or speaker during conversations or the unit may not display caller’s name and/or phone number properly. We recommend the addition of a noise filter (contact your DSL service provider) to the telephone line between the base unit and the telephone line jack.

1.This option is only for DSL users.

2.The filter will be supplied by the DSL service provider.

11