![](/images/new-backgrounds/1251276/25127643x1.webp)
TROUBLESHOOTING
| SYMPTOM | SUGGESTION |
|
The CHARGE/IN USE LED | • Make sure the AC adapter is | ||
light won’t illuminate when | plugged into base and wall outlet. | ||
the remote is placed | • Make sure the remote is properly | ||
in the base | seated in the base. | ||
|
| • Make sure the charging contacts | |
|
| on the remote and base are clean. |
|
The audio sounds weak | • Move the remote and/or base to a | ||
and/or scratchy. | different location away from metal | ||
|
| objects or appliances and try again. | |
|
| • Press SELECT/CH to help eliminate | |
|
| background noise. | |
|
| • Make sure that you are not too far | |
|
| from the base. |
|
Can’t make or receive calls. | • Check both ends of the base tele | ||
|
| phone line cord. | |
|
| • Make sure the AC adapter is | |
|
| plugged into the base and wall | |
|
| outlet. | |
|
| • Disconnect the AC adapter for a | |
|
| few minutes, then reconnect it. | |
|
| • Change the digital security code | |
|
| (See page 37). | |
|
| • Make sure that you are not too far | |
|
| from the base. | |
|
| • Make sure battery is charged. | |
|
|
|
|
The Plantronics Technical Assistance Center (TAC) is ready to assist you! Dial (800)
42
| SYMPTOM | SUGGESTION |
|
| The remote doesn’t | • The battery pack may be weak. |
|
| ring or receive | Charge the battery on the base unit |
|
| a page. | for 15 hours. |
|
|
| • The remote may be too far away |
|
|
| from the base unit |
|
|
| • Place the base unit away from |
|
|
| appliances or metal objects. |
|
|
| • Change the digital security code |
|
|
| (See page 37). |
|
| Severe noise interference. | • Keep the remote away from |
|
|
| microwave ovens, computers, |
|
|
| remote control toys, wireless micro |
|
|
| phones, alarm systems, intercoms, |
|
|
| room monitors, fluorescent lights, |
|
|
| and electrical appliances. |
|
|
| Move to another location or turn |
|
|
| off the source of interference. |
|
| The Caller ID does not display. | • The remote was picked up before |
|
|
| the second ring. |
|
|
| • The call was placed through a |
|
|
| switchboard |
|
|
| • Call your local telephone company |
|
|
| to verify your Caller ID service is |
|
|
| current. |
|
| The remote doesn’t | • Change the digital security code |
|
| communicate with the base. | (See page 37). |
|
|
|
|
|
43
TROUBLESHOOTING