RINGER VOLUME SETUP
REDIALING A CALL
TIP
If you select “Ringer Off”, <Ringer Off> appears on the display when you make or receive
1)When the phone is in the standby mode, press MENU/MUTE.
2) Press ▲ or ▼ to 
move the pointer 
to “Ringer Volume”, 
then press SELECT/CH.
3) Press ▲ or ▼ to move the pointer |
through the ringer settings (Ringer Off, |
The last three phone numbers dialed can be quickly redialed.
REDIALING FROM STANDBY MODE
1)Press PAUSE/ REDIAL. The
phone number that was last
TIPS | B |
If the number | ASICS |
|
exceeds 32 digits, only the first 32 digits are retained in redial memory.
calls, or when charging the remote.
Ringer Low, or |
Ringer High). You will hear a
dialed appears on the display.
2) Press PAUSE/
PAUSE/REDIAL
If the redial memory is empty, you will hear a
ringer or melody
at the selected volume (or does not ring when you select “Ringer Off”).
4)Press SELECT/CH, and you will hear a confirmation tone.
5)Press END to exit.
REDIAL again. PAUSE/REDIAL
Each press of
PAUSE/REDIAL
will display one
of the last three PAUSE/REDIAL numbers
dialed.
beep.
If you have not pressed any key for 30 seconds, the phone returns to standby mode.
If you press END,
RINGER MUTE (TEMPORARILY)
You can temporarily mute the ringer tone. When the remote is off the base and the phone is ringing, press END. The ringer tone will return to the previous setting starting with the next incoming call.
8
3)Press TALK/FLASH. The selected number is dialed.
4)Press END to hang up.
REDIALING FROM TALK MODE
1)Press TALK/FLASH.
2)Press PAUSE/REDIAL. The last number dialed will be displayed and redialed.
3)Press END to hang up.
the operation is canceled and the phone will return to the standby mode.
When using the redial feature in talk mode, only the last number dialed will be displayed.
9
