STEPS TO ENTER NAMES AND SPECIAL
CHARACTERS USING THE KEYPAD
Refer to the letters on the number keys to select the desired characters. With each press of a number key (0 – 9), the displayed character appears in the following order: Upper case letters first, lower case letters next and finally the number corresponding to the key.
IF YOU MAKE A MISTAKE WHILE ENTERING A NAME
Use 
/tSPEED or CIDs to move the cursor to the incorrect character. Press DELETE to erase the wrong character, then enter the correct character. To delete all characters, press and hold DELETE.
16
USING THE PHONEBOOK
When entering names and/or phone numbers, each of the four steps in the entry process must be completed. A “Done” message and a beep indicate the name/phone number is complete.
When the phone is in the standby mode (Talk button not pressed), press 
/tSPEED.
The remote displays the number of the Phonebook locations used, and information on searching and storing Phonebook locations.
(1ST LINE) The number of the Phonebook entries
(2ND LINE) Press the number keypad,
▲or ▼ to search
(3RD LINE) Press SELECT/CH button to begin the storage process.
17
