system setup

SETTING THE AV SYNC

ENG

DVD PLAYBACK MODE

Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.

To play back the DVD-Video portion of the DVD-Audio disc, set the unit to

DVD-Video mode.

1.Press the MENU button while the disc tray is open.

2. Press the Cursor ▼ button to move to Setup and then press the

ENTER or ► button.

MOVE ENTER RETURN EXIT

3.Press the Cursor ▼ button to move to DVD TYPE and then press the ENTER or ► button.

4.Press the Cursor ▲,▼ button to move to DVD VIDEO and then press

the ENTER button.

Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match the video.

1.In Stop mode, press the MENU button.

2.Press the Cursor ▼ button to move to Audio and then press the ENTER or ► button.

3.Press the Cursor ▼ button to move to AV-SYNC and then press the ENTER or ► button.

4.Press the Cursor ￿,￿ button to select the AV-SYNC Delay Time and then press the ENTER button.

•You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.

dPress the RETURN button to return to the previous level.

dPress the EXIT button to exit the setup screen.

MOVE ENTER RETURN EXIT

MOVE SELECT RETURN EXIT

SETUP SYSTEM ●

•Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode.

•DVD VIDEO : Set to play the DVD video contents contained on

MOVE ENTER RETURN EXIT

a DVD audio disc.

•DVD AUDIO : Set to play the default DVD audio.

MDVD Play mode is set to DVD Audio as factory default setting.

Powering off the main unit will automatically switch to the DVD Audio mode.

DviX (R) Registration

Please use the Registration code to register this player with the DivX (R) video on demand format.

To learn more, go to www.divx.com/vod.

SETTING THE DRC (DYNAMIC RANGE COMPRESSION)

This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.

1.In Stop mode, press the MENU button.

2. Press the Cursor ▼ button to move to Audio and then press the ENTER or ► button.

3.Press the Cursor ▼ button to move to DRC and then press the ENTER or ► button.

4. Press the Cursor ￿,￿ to adjust the DRC.

MOVE ENTER RETURN EXIT

•When the Cursor ￿ button is pressed, the effect is greater, and when the Cursor ￿ button is pressed, the effect is smaller.

d Press the RETURN button to return to the previous level.

dPress the EXIT button to exit the setup screen.

CHANGE

RETURN

EXIT

46

SETTING THE HDMI AUDIO

The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.

1.In Stop mode, press the MENU button.

2.Press the Cursor ￿ button to move to Audio and then press

the ENTER or ► button.

3.Press the Cursor ￿ button to move to HDMI AUDIO and then press the ENTER or ► button.

4.

Press the Cursor ￿,￿ button to select ON or OFF and then press

MOVE ENTER RETURN EXIT

 

the ENTER button.

•ON : Both video and audio signals are transmitted over the HDMI

connection cable, and audio is output through your TV speakers only.

•OFF : Video is transmitted over the HDMI connection cable only, and audio is output through the home cinema speakers only.

MOVE SELECT RETURN EXIT

dPress the RETURN button to return to the previous level. d Press the EXIT button to exit the setup screen.

MThe default setting of this function is HDMI AUDIO OFF.

HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.

SETTING THE AUDIO

Manually Adjusting the Speaker Volume and Balance with the SOUND EDIT Button.

Press the SOUND EDIT button and then press the Cursor ￿,￿ button.

Adjusting Front Speaker Balance

You can select between 00, -06, and OFF.

The volume decreases as you move closer to –6.

Adjusting Subwoofer Speaker Level

The volume level can be adjusted in steps from +6dB to –6dB.

The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.

47