Samsung HT-X810T/XSV, HT-X810R/XEF, HT-X810R/EDC manual AUX2 Connecting an External Analog Component

connections

CONNECTING AUDIO FROM EXTERNAL COMPONENTS (CON'T)

CONNECTING THE FM ANTENNA ENG

1.Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.

2.Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it to a wall or other rigid surface.

AUX2 : Rear Panel

HDMI OUT

Audio Cable (not supplied)

If the external analog component has only one Audio Out, connect either left or right.

External Analog Component

OPTICAL : Rear Panel

HDMI OUT

Optical Cable

(not supplied)

External Digital Component

		●
HDMI OUT		CONNECTIONS
	FM Antenna
	(supplied)

M This unit does not receive AM broadcasts.

AUX2 : Connecting an External Analog Component

Analog signal components such as a VCR.

1.Connect AUX IN 2 (Audio) on the Home Cinema to the Audio Out of the external analog component.

•Be sure to match connector colors.

2.Press the AUX button on the remote control to select AUX 2 input.

•You can also use the FUNCTION button on the main unit. The mode switches as follows :

DVD/CD D.IN AUX 1 AUX 2 USB BT AUDIO FM.

M You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to this product.

OPTICAL : Connecting an External Digital Component

Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).

1.Connect the Digital Input (OPTICAL) on the Home Cinema to the Digital Output of the external digital component.

2.Press the AUX button on the remote control to select DIGITAL IN.

•You can also use the FUNCTION button on the main unit. The mode switches as follows :

DVD/CD D.IN AUX 1 AUX 2 USB BT AUDIO FM.

22 23