HP 7000 dl Router manual Ip subnet-zero, Config#ip subnet-zero

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

ip subnet-zero

The ip subnet-zerocommand is the default operation and cannot be disabled. This command signifies the router’s ability to route to subnet-zero subnets.

Syntax Description

No subcommands.

Default Values

By default, this command is enabled.

Command Modes

(config)# Global Configuration Mode required

Usage Examples

The following example subnet-zerois enabled:

(config)#ip subnet-zero

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 306