HP 7000 dl Router manual Crl

SROS Command Line Interface Reference Guide Certificate Configuration Command Set

crl

Use the crl command to restore a CRL. Use the no form of this command to remove the CRL for the specific CA.

Syntax Description

No subcommands.

Default Values

No defaults necessary for this command.

Command Modes

(config-cert-chain)# Certificate Configuration

Functional Notes

The user typically does not enter this command. It is primarily used to restore CRLs from startup-config when the product is powered up.

Usage Examples

The following example removes the CRL for the current CA:

(config-cert-chain)#no crl

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 432