HP 7000 dl Router Snmp-server contact string, Config#snmp-server contact Network Administrator

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

snmp-server contact <string>

Use the snmp-server contact command to specify the SNMP sysContact string. Use the no form of this command to remove a configured contact.

Syntax Description

“<string>”Alphanumeric string encased in quotes (up to 32 characters in length) used to populate the sysContact string.

Default Values

<string>Customer Service

Command Modes

(config)# Global Configuration Mode required

Usage Examples

The following example specifies Network Administrator x4000 for the sysContact string:

(config)#snmp-server contact “Network Administrator x4000”

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 336