HP 7000 dl Router manual Show frame-relay, Frame-relay, Enable #show frame-relay lmi

SROS Command Line Interface Reference Guide Enable Mode Command Set

show frame-relay

Use the show frame-relaycommand to display configuration and status parameters for configured virtual Frame Relay interfaces.

Variations of this command include the following:

show frame-relay lmi show frame-relay pvc

show frame-relay pvc interface frame-relay <interface>

Syntax Description

lmi	Displays LMI (Link Management Interface) statistics for each virtual Frame Relay
	interface
pvc	Displays PVC (Permanent Virtual Circuit) configuration and statistics for all virtual
	Frame Relay interfaces (or a specified interface)
frame-relay	Optional keyword used to display Frame Relay PVC statistics for a specific Frame
	Relay interface.
<interface>	Specifies the virtual Frame Relay interface (for example fr 1)

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following are sample outputs from various show frame-relaycommands:

>enable

#show frame-relay lmi

LMI statistics for interface FR 1 LMI TYPE = ANSI

Num Status Enq. Sent 79	Num Status Msgs Rcvd 71
Num Update Status Rcvd 12	Num Status Timeouts 5
#show frame-relay pvc

Frame Relay Virtual Circuit Statistics for interface FR 1

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 126