HP 7000 dl Router manual Ip firewall alg ftp pptp sip, Config#no ip firewall alg ftp

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

ip firewall alg [ftp pptp sip]

Use the ip firewall alg command to enable the application level gateway (ALG) for a particular application. Use the no form of this command to disable ALG for the application.

Syntax Description

ftp	Enables the FTP ALG.
pptp	Enables the PPTP ALG.
sip	Enables the SIP ALG.

Default Values

By default, the ALG for FTP, PPTP, and SIP are enabled.

Command Modes

(config)# Global Configuration Mode.

Usage Examples

The following example disables ALG for FTP:

(config)#no ip firewall alg ftp

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 277