
Billion 800VGT Router
IGMP
IGMP, known as Internet Group Management Protocol, is used to management hosts from multicast group.
IGMP Forwarding: Accepting multicast packet. Default is Enable.
IGMP Snooping: Allowing switched Ethernet to check and make correct forwarding decisions. Default is
Disable.
VLAN Bridge
This section allows you to create VLAN group and specify the members.
Edit: Edit your member ports in selected VLAN group.
Create VLAN: To create another VLAN group.
Advanced VLAN Setup Example (Triple Play)
VLAN_data:
Ethernet Port 1, Wireless and Wireless WDS are reserving for Internet - On Ethernet port 1, VC 0/40 bridged mode is also required.
VLAN_Video
Ethernet ports: 2, 3 and 4:
-0/33
-0/34 Video
-0/35 Video
-0/36 Video Subscriber Services (EPG, EAS, etc.)
-0/37 Video
-0/38 Video
-0/39 Spare
Step 1: Setup Member Ports
Go to Configuration LAN Bridge Interface.
You can setup member ports for each VLAN group under Bridge Interface section. From the example, two VLAN groups need to be created.
Ethernet: P1 (Port 1)
Ethernet1: P2, P3 and P4 (Port 2, 3, 4) Please deselect P2, P3, P4 from Ethernet VLAN Port first.
Note: You should setup each VLAN group with caution. Each Bridge Interface is arranged in this order.